NABTEB Electrical Installation and Maintenance Works Questions 2024 Update
– NABTEB Electrical Installation and Maintenance Works Questions –
NABTEB Electrical Installation and Maintenance Works Questions will guide you before taking part in the NABTEB exams. Electrical Installation and Maintenance Works NABTEB Expo Questions are out now on our website.
NABTEB is one of the examination bodies set up by the Federal Government in 1992 to reduce the burden of conducting examinations, which involves a lot of technical and trade-related practicals.
The board conducts the National Technical Examination (NTC), National Business Certificate (NBC) and their respective advance level examinations (ANBC and ANTC).
NABTEB Electrical Installation Questions & Answers 2024
Electrical Installation and Maintenance Works OBJ Answers:
1-10: ADBBCCCBCC
11-20: BBCBCDADBB
21-30: B-DBBACACC
31-40: DD-C–BBDC
Electrical Installation and Maintenance Works Theory Answers:
(5a)
Conductor: A conductor is a material which electricity, heat or sound can flow through. An electrical conductor conducts electricity. The ability to conduct electricity is called electrical conductivity. Examples: Iron and copper
(ii)Insulator : An electrical insulator is a material whose internal electric charges do not flow freely; very little electric current will flow through it under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. Examples: plastics and rubber.
(5b)
(choose Any Two)
(i)Flux allows solder to properly form between the pad and the component.
(ii)It extends the life of the solder particles.
(iii)It generates the correct viscosity and adhesion.
(iv)It cleans the surface of pad and components.
(v)It cleans oxide in the solder particles.
(vi)Protect surfaces during soldering.
(5c)
(Choose Any Two)
(i)Western Union splice: connects two conductors together and is particularly useful in repairing a broken wire. The two wires are trimmed of insulation, then each is wrapped around the other around six times.
(ii)Tap splice: A tap splice connects a loose wire to the conductor at an angle, typically resembling a “T” shape. They are named tap splices because the loose wire can then “tap” the flow of the conductor. The wires of the loose wire are wrapped around the conductor, first with one on one side and then with five or more on the other.
(iii)Fixture splice: A fixture splice connects two different conductors and can be called a rat tail splice. The two exposed wires must be twisted together with a plier, then bent into place.
(6a)
(I) Earth Lead: The conductive strip or wire that connects an electrical installation or appliance to the earth electrode is called Earth Lead. Earth lead can be of copper, galvanised iron etc.
(ii) Earth Electrode: A conductor buried in the earth for electrical earthing is known as an earth electrode. The shape of the earth electrode may vary from the conductive rod, conductive plate, metal water pipe, or any other conductor with low resistance. Earth electrodes are made of copper, galvanised iron, cast iron etc.
(iii) Earth Continuity Conductors: They are the conductors used for connecting the earth lead to various electrical appliances and devices such as distribution boards, electrical sockets, appliances, etc. It may be as flexible wire, cable metallic covering or metallic pipe.
(iv) Consumers’ earthing: Consumers’ earthing terminal is typically connected to the metallic sheath or armour of the distributor’s service cable into the premises. The consumer has no permission to mix neutral with earth at his premises. Here earthing and grounding is different by practice.
(6b)
(I) Protective conductors are to be separate for each circuit. The selection of sizes is to be under Table 54F of IEE Regulations.
(ii) Protective conductors are not to be formed by conduit, trunking, ducting or the like.
(iii) Conductors buried in the ground shall normally be laid at a depth of 1000 mm below the underground power cables in an excavated trench.
DISCLAIMER! These are not real NABTEB Electrical Installation and Maintenance Works Questions, but likely repeated questions over the years to help candidates understand the nature of their examinations. Ensure to note every question provided on this page.
If you need us to help you with more updated information at the right time about NABTEB Electrical Installation and Maintenance Works Questions 2024, kindly provide us with your phone number and email address in the comment box below.
Also, ask questions pertaining to this guide.
What’s your take on this? We believe this article was interesting right. If yes, use our share button below to inform – friends and relations via Facebook or Twitter.
CSN Team
