NABTEB Fabrication and Welding Questions 2022 Objective and Theory Update
– NABTEB Fabrication and Welding Questions –
NABTEB Fabrication and Welding Questions will guide you before taking part in the NABTEB exams. Fabrication and Welding NABTEB Expo Questions are out now on our website.
About NABTEB
The National Business and Technical Examinations Board was founded in 1992 to domesticate craft level examinations.
Equally, it was previously conducted by City & Guilds, Pittman’s, and the Royal Society of Arts throughout the United Kingdom in conformity with the principles of the National Policy on Education.
Its formation was the culmination of a 15-year evolutionary process in which FOUR Government Panels were established at various periods to assess the place and structure of public examinations in our educational system.
Mission
Develop as a Globally Recognized Assessment Body for craftsmen and technicians.
Vision
NABTEB is a vision-led, mission-driven public institution with the following vision: To be a Globally Recognised Assessment and Certification Body Preparing Candidates for the Workplace and Academic/Professional Excellence.
The management of the National Business and Technical Examinations Board (NABTEB) is yet to release the 2022 November/December NBC/NTC and ANBC/ANTC examinations results.
Candidates who intend to take part in the 2022 NABTEB GCE can learn how to check their results online.
NABTEB Fabrication and Welding Questions 2022
ALTERNATIVE TO PRACTICAL TEST
The Council may consider testing candidates’ ability in practical work as prescribed in the syllabus in the event that materials for the actual practical test cannot be acquired.
For this alternative test,, there will be one question to be answered in 3 hours for 100 marks.
OBJECTIVE
1. Which of the following is used to clean metal surfaces before welding?
A. Petrol
B. Emery cloth
C. Soap
D. Chemical
2. A single V-edge preparation on a 6mm thick plate can be made with the
use of
A. file.
B. scraper.
C. grinder.
D. drill.
3. Which of the following is not a weld defect?
A. Porosity
B. Slag inclusion
C. Lack of fusion
D. Heating zone
4. Which of the following is not considered when setting up a fabrication and
welding workshop?
A. Cost
B. Site
C. Weather
D. Object
5. The ability of a metal to go back to its original shape after deformation is
called
A. hardness.
B. toughness.
C. elasticity.
D. plasticity.
6. The property that enables a material to withstand indentation is
A. hardness.
B. toughness.
C. elasticity.
D. plasticity.
NABTEB is one of the examination bodies set up by the Federal Government in 1992 to reduce the burden of conducting examinations, which involves a lot of technical and trade-related practicals.
The board conducts the National Technical Examination (NTC), National Business Certificate (NBC) and their respective advance level examinations (ANBC and ANTC).
READ ALSO!!!
➢ NABTEB GCE Guide Nov/Dec 2022
➢ NABTEB GCE Registration Form
➢ NABTEB Portal www.nabteb.gov.ng/
DISCLAIMER! These are not real NABTEB Fabrication and Welding Questions, but likely repeated questions over the years to help candidates understand the nature of their examinations. Ensure to note every question provided on this page.
If you need us to help you with more updated information at the right time about NABTEB Fabrication and Welding Questions 2022, kindly provide us with your phone number and email address in the comment box below.
Also, ask questions pertaining to this guide.
What’s your take on this? We believe this article was interesting right. If yes, use our share button below to inform – friends and relations via Facebook or Twitter.
CSN Team
