NABTEB Ship Building Craft Practice Questions 2022 Latest Update
– NABTEB Ship Building Craft Practice Questions –
NABTEB Ship Building Craft Practice NABTEB Expo Questions is out now on our website. In this article, I will show you past random repeated questions for free. All you need to do is to stay focused and follow this guide.
About NABTEB
The National Business and Technical Examinations Board was founded in 1992 to domesticate craft level examinations previously conducted by City & Guilds, Pittman’s, and the Royal Society of Arts throughout the United Kingdom in conformity with the principles of the National Policy on Education.
Its formation was the culmination of a 15-year evolutionary process in which FOUR Government Panels were established at various periods to assess the place and structure of public examinations in our educational system.
Mission
Develop as a globally recognised assessment body for Craftsmen and Technicians.
Vision
NABTEB is a vision-led, mission-driven public institution with the following vision: To be a Globally Recognised Assessment and Certification Body Preparing Candidates for the Workplace and Academic/Professional Excellence.
The management of the National Business and Technical Examinations Board (NABTEB) is yet to release the 2021 November/December NBC/NTC and ANBC/ANTC examinations results.
Candidates who intend to take part in the 2021 NABTEB GCE can learn how to check their results online.
NABTEB is one of the examination bodies set up by the Federal Government in 1992 to reduce the burden of conducting examinations, which involves a lot of technical and trade-related practicals.
The board conducts the National Technical Examination (NTC), National Business Certificate (NBC) and their respective advance level examinations (ANBC and ANTC).
READ ALSO!!!
➢ NABTEB GCE Guide Nov/Dec 2021
➢ NABTEB GCE Registration Form
➢ NABTEB Portal www.nabteb.gov.ng/
NABTEB Ship Building Craft Practice Questions
1. List the factors that influence a vessel’s design.
2. In the attached transverse section of a metal hull, show the location of the following:
deck beam
bracket
side frame
chine bracket
floor
side girder
keelson.
Fig 1
3. In the attached figure label, the parts indicated by (______)
Fig 2
4. In the following sketch of a transverse section through a timber hull, name the numbered parts.
Fig 3
5. In the following sketch of a typical deadwood aft, name the numbered parts.
Fig 4
6. In the following sketch of a typical stem assembly of a timber vessel, name the numbered parts.
Fig 5
7. List the advantages and disadvantages of using aluminium for vessel construction.
8. List the advantages and disadvantages of using Ferro cement for vessel construction.
9. List the advantages and disadvantages of using FRP for vessel construction.
10. List the advantages and disadvantages of using Steel for vessel construction.
11. List the advantages and disadvantages of using Steel for vessel construction.
12. Describe the maintenance required to be carried out on deck and hull openings to ensure the watertight integrity of a vessel.
More Questions on Ship Building Craft
In the following questions, circle the most correct answer.
13.
The distance from the forepart of the hull to the after part of the hull, taken at the upper side of the uppermost continuous deck, is known as
a) length between perpendicular
b) length overall
c) measured length
14.
The distance from deck to waterline is known as:
a) depth
b) draft
c) freeboard
15.
If the deck of a vessel has an upward curve, it is said to have
a) camber
b) flare
c) deadrise
16.
The flare of the bow
a) increases speed
b) promotes deck dryness
c) decreases speed
17.
If the main stiffeners of the hull run from side to side. the arrangement is called a
a) transversely framed structure
b) longitudinally framed structure
c) vertically framed structure
18.
If the main stiffeners of the hull run fore and aft, the arrangement is called a
a) transversely framed structure
b) longitudinally framed structure
c) vertically framed structure
19.
On a steel vessel, vertical plates fitted transversely to the bottom shell are known as
a) roofs
b) floors
c) walls
20.
The void space between two bulkheads is called
a) keel
b) cofferdam
c) floor
21.
A collision bulkhead must be fitted to all vessels
a) over 12 metres in the measured length
b) over 16 metres in the measured length
c) over 24 metres in the measured length
22.
All pipes passing through a watertight bulkhead must
a) pass directly through it
b) not carry fuel oil
c) must be flanged to it
23.
When a hatchway is cut into the deck of a vessel, the corners
a) are squared
b) are rounded
c) can be any shape
24.
Freeing ports are provided on the deck to
a) rapidly clear the deck of water
b) rapid loading of cargo
c) rapid discharging of cargo
More Questions on Ship Building Craft
25.
In general, the survey requirements require a vessel to be
a) weathertight below the freeboard deck
b) watertight above the freeboard deck
c) watertight below the freeboard deck
26.
Deadlight is the name given to
a) a hinged metal cover on a porthole
b) curtains on a window
c) generator failure
27.
Airpipes of bore exceeding 30mm, when placed in exposed positions
a) should be made of aluminium
b) should be provided with watertight closures
c) should be fitted with automatic sounding devices
28.
Doors in watertight bulkheads can be
a) sliding-type only
b) hinged type only
c) sliding type or hinged
29.
The efficiency of watertight closures can be tested by
a) a hose test
b) a chalk test
c) either a hose test or a chalk test
30.
Watertight seals of closures should
a) be painted bright orange
b) be kept well greased
c) should never be painted
DISCLAIMER! These are not real NABTEB Ship Building Craft Practice Questions, but likely repeated questions over the years to help candidates understand the nature of their examinations. Ensure to note every question provided on this page.
If you need us to help you with more updated information at the right time about NABTEB Ship Building Craft Practice Questions, kindly provide us with your phone number and email address in the comment box below.
Also, ask questions pertaining to this guide.
What’s your take on this? We believe this article was interesting right. If yes, use our share button below to inform – friends and relations via Facebook or Twitter.
CSN Team.
