WAEC Auto Parts Merchandising Syllabus 2020/2021 | See Concentrated : Current School News

WAEC Auto Parts Merchandising Syllabus 2021/2022 | See Concentrated Topics Here

Filed in Exam, WAEC News by on October 6, 2021

ADS! Download JAMB CBT Software Now for FREE!

– WAEC Auto Parts Merchandising Syllabus –

WAEC Auto Parts Merchandising Syllabus 2021 is Out: The Auto Parts Merchandising 2021/2022 West African Examination Council (WAEC) Syllabus is aiming at preparing candidates for the Board’s examination.

WAEC Auto Parts Merchandising Syllabus

 SCHEME OF EXAMINATION

There will be two papers, Paper 1 and 2, both of which will be a composite paper to be taken at a sitting.

PAPER 1: This will comprise forty multiple-choice questions, all of which must be taken in 50 minutes for 40 marks.

PAPER 2: This will comprise two sections, Sections A and B. Both sections will last for 2 hours and carry 100 marks.

Section A: This will comprise three questions including a compulsory one and drawn on the technical part of the syllabus. They will require candidates to answer two questions, including the compulsory one. The section will carry 40 marks.

Section B: This will consist of four questions based on the merchandising part of the syllabus. They will require candidates to answer three of the questions for 60 marks.

DETAILED SYLLABUS

S/N SECTIONS CONTENTS NOTES
1.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TECHNICAL SECTION (A) AUTOMOBILE PARTS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(B)  TOOL, TEST EQUIPMENT AND ACCESSORIES
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(1)   SAFETY IN AUTO PARTS MERCHANDISING SHOP:
i. Definition of safety.
ii. Safety clothing ( helmet, goggle, hand glove, nose mask, foot boot, overall dress)
iii. Fire extinguisher: types of extinguishers
iv. Causes and prevention of accident
(2)   ENGINE PARTS:
i. Identification of parts, examples of Pistonof Piston, Piston rings, Connecting rod, Camshaft, Crankshaft, Valves, Cylinder head and Oil pump.
ii. Sketching of Engine parts as listed above.
iii. Location and functions of engine parts.
(3)   TRANSMISSION SYSTEM(CLUTCH):
i. Identification of parts of a clutch. ( flywheel, clutch plate, pressure plate assembly and release bearing)
ii. Functions of the clutch parts.
(4)   TRANSMISSION SYSTEM (GEARBOX):
i. Types of gearbox:
(manual – 3, 4 & 5 speeds and automatic transmission)
ii. Functions of the gearbox.
(5)   TRANSMISSION SYSTEM (PROPELLER SHAFT AND REAR AXLE ASSEMBLY):
i. Types of propeller shafts and universal/sliding joints.
ii. Functions of the transmission system parts.
iii. Identification of parts of the axle assembly.
(6)   SUSPENSION SYSTEM:
i. Types. (Normal beam and independent suspension system.)
ii. Parts of suspension system-Damper, spring (coil springs, torsion bar, leaf spring)
iii. Functions of the parts.
(7)   COOLING SYSTEM:
i. Types. ( water and air cooling system)
ii. Functions of the cooling system.
iii. Parts of water and air cooling systems. ( Radiators, fan blade, fan belt, water pump, water host and thermostat).
(8)   STEERING SYSTEM:
i. Types. (Manual and power-assisted steering.)
ii. Parts of steering (steering gearboxes, steering wheel, steering shaft and tie-rod.
iii. Functions of the parts.
(9)   BRAKING SYSTEM:
i. Types. (Disc and drum)
ii. Parts. (master cylinder, wheel cylinder, connecting pipe, brake pads, brake shoes/ lining)
iii. Functions of the parts.
(10)        LUBRICATION SYSTEM:
i. Parts. ( Oil tank/sump, Oil filter, Oil cooler, Oil seal, Pressure switch and Oil pump & types
ii. Types of lubricant (Oil and grease)
iii. Types of Oil (SAE40, SAE60 and SAE 30/20w)
iv. Quality and uses of oil and grease.
(11) ELECTRICAL PARTS:
i. Components ( Battery, fuse, electrical control unit/brain box,  alternator, ignition, coil, bulb, and cut-out)
ii. Identification of the components.
iii. Functions of the component.
(12) WHEELS AND TYRES:
i. Types of a wheel ( Spoke wheel, alloyed wheel and pressed steel  wheel)
ii. Types of tyres (tube and tubeless)
iii. Sizes of wheel and tyre.
iv. Functions of wheel and tyre.
(1)   TYPES OF TOOLS AND THEIR USES:
i. General tools (Spanner, harmer, mallet, Allen key, screwdriver, and plier)
ii. Special tools (Extractor, pullers, Sledgehammer, and lifters)
iii.   Differences between general and special tools
(2) CARE OF TOOLS
i. Ways/means of caring for tools, e.g.(greasing, cleaning and packing)
ii. Effects of improper tools care
(3)   TEST EQUIPMENT
i. Types (Spark plug cleaner, engine analyzer, dwell angle tester,  Exhaust gas analyzer, and vacuum tester)
ii. Functions of different types of test equipment.
(4)   MAINTENANCE OF TEST EQUIPMENT
i. Knowledge of starting and stopping the equipment.
ii.                  Importance/Uses of manufacturers’ Manuel.
(5)   ACCESSORIES
i. Definition.
ii.  Importance.
iii. Care of accessories.
iv. Types (steering cover, car radio, wheel cover, seat cover and car cover)
2. MERCHANDISING SECTION (A)  STORAGE, CATALOGING AND  VISUAL PRESENTATION             
 
(1)   STORAGE:
i. Definition
ii. Process and ways of storing parts
iii. Reasons for proper storing of parts
(2)   CATALOGUING:
i.  Definition.
ii. Functions
iii. Process of locating Auto parts using Catalogue.
(3)   RE-ORDER QUANTITY
i.   Meaning
ii. Importance/Advantage of re-order quantity.
iii. . The process of re-ordering auto- parts quantity /Stock.
iv. Principle of maintaining parts/stock level and its importance.
v. Calculations (Re-order level, FIFO and LIFO)
(4)   VISUAL PRESENTATION:
i. Methods of items presentation /grouping/arrangement of parts (by branding and manufacturers/models
ii. . Advantages of item presentation.
(5)   INVENTORY:
i. Definition.
ii.  Types( Daily, Periodic and annual)
iii. Procedure for inventory taking( use of bin card)
(6)   PRODUCT SOURCING:
i.  Definition.
ii.  Ways of sourcing products
iii. Importance.
    (B)  SALES, INVOICING, FORECASTING, RECORD KEEPING, FUNDRAISING, MARKET ANALYSIS, ADVERTISING, VALUE PRICING AND CUSTOMER SERVICES. (1)   SALES:
i.   Definition.
ii.  Types ( Cash, Credit/ deferred sales)
iii. Method of selling (Personal, door-to-door, trade fairs, open market, unit shops.
iv.  Explanation and procedure for sales calls
(2)   INVOICING:
i.  Meaning.
ii.  Contents.
iii.                Uses/Importance.
(3)   FORECASTING:
i.  Definition.
ii. Need/Reasons for forecasting.
iii.   Advantages of forecasting.
(4)   RECORDKEEPING:
i. Types of records. (sale journal, purchases  journal, sales ledger, purchase ledger, invoice, receipt and cash book.)
ii.  Process of keeping the records
iii.  Uses of the various records.
(5)   FUNDRAISING(SOURCE OF FINANCE):
i.   Definition of fundraising.
ii.   Types of funds.
iii.    Source/ways of raising funds.
iv.  The process/procedure of raising funds.
(6)   MARKET ANALYSIS:
i. Definition of market.
ii. Definition of market analysis.
iii. Definition of a market segment.
iv. Explanation of Market segmentation.
v. Procedure and basis for Market Segmentation.
(7)   VALUE PRICING:
i. Definition.
ii.  Types.
iii.  Application.
(8)   ADVERTISING:
i. Definition.
ii.  Types.
iii.  Media of advertising.
iv. Advantages.
(9)   CUSTOMER SERVICE:
i.  Meaning
ii. Types
iii.Importance/advantages
iv. Handling of customers’ complaints
    ( C )  WARRANTY/ GUARANTY AND REGULATORY BODIES. (1)   WARRANTY/ GUARANTY:
i. Meaning.
ii. Importance.
iii. Procedure for claiming warranty/guaranty right
iv. Process of losing warranty right
(2)   REGULATORY BODIES:
i. Reason for regulation.
ii. Quality control (Definition and types)
iii. Ways to improve quality.
iv. Examples of Regulatory Body. (Standard Organisation of Nigeria- SON, Consumer Protection Board and Society of Automobile Engineers – SAE)
v. Functions.
    (D) ENTREPRENEURSHIP (1)   INTRODUCTION TO AUTO PARTS MERCHANDISING:
i.  Definition of merchandising.
ii. Explanation of Auto parts merchandising.
(2)   PERSONAL QUALITIES OF A MERCHANDISER:
i. Qualities of an auto parts seller.
(3)   ETHICAL BUSINESS BEHAVIOUR:
i. Definition.
ii. Type
iii. Explanation of behaviour expected of an auto part seller.


RECOMMENDED TEXTBOOKS

  1. Technology For Motor Vehicle Mechanics, Parts 1, 2 &3. By Mudd, S.C.
  2. Motor Vehicle Technology and Practical Work. By Dolan, D. A.
  3. Principles of Marketing. By Philip Kotler.
  4. By Giles, G.B. ( The M&E handbook)

If you found this article useful and would love to get more updates like this one, kindly subscribe below, by entering your email and hit the share button to share with your friends.

CSN Team.

Join Over 5 Million Subscribers Today!


=> FOLLOW US ON INSTAGRAM | FACEBOOK & TWITTER FOR LATEST UPDATE

Tags: , , , ,

Comments are closed.

%d bloggers like this: