Ads: Get Admission into 200 Level and Study any Course in any University of Your Choice. Low Fees | No JAMB UTME. Call 08063692710

Sellafield Energy Resources Limited Job Portal 2019 | www.sellafieldenergy.com

Filed in Job by on October 9, 2019 0 Comments

Ads: Knock-off Diabetes in 60 Days => ORDER HERE!


Sellafield Energy Resources Limited Job Portal 2019 | www.sellafieldenergy.com.

Sellafield Energy Resources Limited is a leading provider of resources and services to Nigeria’s energy sectors. The company has within a short time emerged as a reference point in the sourcing and provision of personnel, technology, equipment and general materials, amongst other critical resources to our growing number of clients in oilfields and power plants operations.

Sellafield Energy Resources Limited Recruitment Portal

We are recruiting to fill the position below:

1. Job Title: Electrical Commissioning Engineer

Location: Port Harcourt, Rivers
Industry: Oil & Gas
Job Description

  • This position is responsible for design calculation report, coordinate site investigation /design, bill of quantity, material take-off (MTO), installation, commissioning and start-up of electrical equipment/systems at the customer site/filling station.
  • Designing, programming, testing, installation and commissioning of electrical equipment like power distribution panels, transformer, motors, soft starter, relays, lighting, lightning arrestor and earthing.
  • Prepare layout, P&ID, schematic drawing.
  • Preparation of MTO and Load/Cable Schedule as well as all the equipment datasheets and specifications.
  • Perform calculations such as Generator sizing, Cable sizing, UPS Battery Sizing, Lighting, Earthing, Short Circuit Analysis)
  • Preparation of electrical commissioning work packages and procedures and dossiers.
  • Reviews designs/technical documentation and supervise contractors and subcontractors
  • Support of commissioning and start-up of an assigned scope of work including specific complex deliverables such as development of a detailed commissioning and start-up plan and schedule.
  • Assist in preparation of the project execution plans, cost estimates, subcontracts requirements and risk management
  • Developing detailed commissioning and start-up procedures for assigned electrical systems
  • Provision of detailed technical analysis of electrical equipment in the plant.
  • Supervise the Electrical Commissioning Team in meeting scheduled deadlines and ensuring the technical integrity of work carried out
  • Assist Construction with inspection and Punch Lists of installation and vendor packages
  • Acceptance of Mechanically complete sub-systems packages
  • Manage the completion of walk-downs and Punch Lists of offered system/sub-systems
  • Manage electrical vendor support during the commissioning phase for the assigned systems
  • Updating and forwarding the Punch List per system to the CMS/Database Operator
  • Ensure all documentation; tools, consumables and equipment are available to perform work scope
  • Coordination of functional testing of commissioned systems and engaging the Operations Team when and where needed
  • Provide Operations with technical support throughout start-up, stabilization and performance testing
  • Performing routine test of continuity, insulation, resistance and high potential on both LV and HV cables, motors, transformers, generators, bus bars etc. based on best industry standard.
  • Any other duty that may be assigned by Line Manager

Requirements

  • Bachelor’s Degree in Electrical/Electronic Engineering discipline.
  • Minimum of ten (10) years’ working experience in in electrical commissioning in oil and gas sector downstream or upstream. Knowledge of Regasification systems will be an advantage.
  • Experience of effectively interfacing and working together with Design, Construction Contractors and Operations
  • Proficient to the codes and standards in the oil and gas industry i.e. API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.
  • Experience with 480VAC, medium voltage 4160VAC and above switchgear controls
  • Experience with Gas Generator Start up and Commissioning
  • Electrical Distribution Systems including 480V Motor Control Centers
  • Lighting Systems and Distribution Panels
  • DC and UPS Power Systems
  • PLC logic controls
  • Strong communication skills with well-developed interpersonal and visible leadership capability;
  • Ability to work in a multi-cultural environment.

Application Closing Date
Not Specified.

How to Apply

Interested and qualified candidates should:
Click here to apply online


2. Job Title: Electrical Engineer

Location: Port Harcourt, Rivers
Industry: Oil & Gas
Job Description

  • This position is responsible for design, installation, commissioning, operation and Maintenance of electrical equipment/systems within the plant for optimum plant reliability.
  • Maintenance and operation of all plant’s electrical systems.
  • Maintenance and troubleshooting of electrical equipment like Power distribution panels, Transformer, motor, soft starter, VFD, relays, lighting, lightning arrestor and earthing.
  • Preparation of electrical operation and maintenance procedures.
  • Provision of detailed technical analysis of electrical equipment in the plant.
  • Preparation of Task list, maintenance schedule for SAP PM module development.
  • Forecast and prepare budget for electrical related activities i.e. maintenance, shutdown and project for consolidation into department yearly Work Program and Budget (WPB). Monitor budget utilization closely and provide justification for variance.
  • Coordination with other departments for effective commissioning and troubleshooting of electrical and systems.
  • Carrying out troubleshooting and condition monitoring on electrical systems to improve equipment reliability.
  • Provide detailed technical support to field technicians to ensure overall plant reliability and availability.
  • Identify, study, propose, and implement area for improvement (project) in the field of electrical engineering to enhance operation and improve total equipment reliability. Participate in equipment testing and trials.
  • Verify, approve and follow-up all maintenance work orders and conduct post-work order verification.
  • Participates in safety training, on job training, firefighting exercises and use of fire /safety equipment.
  • Populate inputs into Computerized Materials and Maintenance Management System (CMMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to maintenance planner with regards to electrical maintenance activities for his consolidation into SAP PM Plan.
  • Conduct on-the-job calibration training for new calibration staff. Supervise and groom Junior Electrical Engineers to develop his technical knowledge, skills and competencies in order to produce potential talent for future business needs.
  • Performing routine test of continuity, insulation, resistance and high potential on both LV and HV cables, motors, transformers, generators, bus bars etc. based on best industry standard.
  • Any other duty that may be assigned by Line Manager

Requirements

  • Bachelor’s Degree/HND in Electrical/Electronic Engineering disciplines.
  • Minimum of ten (10) years working experience in in electrical maintenance in oil and gas sector downstream or upstream.
  • Proficient to the codes and standards in the oil and gas industry i.e. API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.
  • Knowledge of Maintenance Management System
  • Strong communication skills with well-developed interpersonal and visible leadership capability;
  • Ability to work in a multi-cultural environment.

Application Closing Date
Not Specified.

How to Apply

Interested and qualified candidates should:
Click here to apply online


3. Job Title: Mechanical Engineer (Maintenance)

Location: Port Harcourt, Rivers
Industry: Oil & Gas
Job Descriptions

  • This position is responsible for design, installation, commissioning, operation and Maintenance of static and rotary equipment/systems within the plant for optimum plant reliability.
  • Formulate a plan, review and analyse preventive maintenance strategy for the rotary and static equipment in order to achieve highest efficiency of the activities for reliable and safe operation.
  • Lead preparation of O&M procedures and monitor operational and maintenance procedures and practices are adhered to provide assurance.
  • Developing maintenance strategies, spares, operating philosophy based on Risk & Reliability Management (RRM) principles like RCM and PM Library to improve system reliability and availability whilst optimising OPEX and increasing asset life through continuous improvement drive.
  • Monitor & provide input to Reliability KPIs like Mitigate Threat to availability (MTA), Deferments, RCA/Investigation & Bad actor action status & key leading and lagging indicator for Management Information Report (MIR) & Reliability forecasts.
  • Promote Predictive maintenance (PdM) and condition-based maintenance (CBM) approaches through regular reviews.
  • Provide specialist expertise for trouble shooting, alignment of equipment, diagnostics analysis and remedial actions for failures and breakdowns of rotating equipment and preferred rotating equipment operating philosophy, modes/regimes.
  • Focal point for the Technical proactive monitoring (TPAM) of rotating equipment to predict early performance/condition drift and advise corrective actions requiring major overhaul/repair for compressors, pumps and gas engines.
  • Provide input and justification for annual & long-term budget requirements for rotating machines. Monitor and control budget for rotating equipment.
  • Ensure robust management of change and plant maintenance deferments related to rotating machines to assure HSSE, Process safety & reliability related risks associated with the change.
  • Coordinate investigations and follow up action of major and equipment failures addressing technical, commercial and legal/insurance implications.
  • Act as Technical authority for Rotating equipment discipline for Plant change proposals by reviewing them, reject the ones that do not meet the criteria and process the other for approval through the system and keep track of the approval process.
  • Support to the planning and management to forecast and prepare budget for mechanical related activities i.e. maintenance, shutdown and project for consolidation into department yearly Work Program and Budget (WPB). Monitor budget utilization closely and provide justification for variance.
  • Support multi-disciplinary commissioning of static and rotary equipment including gas engines.
  • Provide specialist technical support/operational expert input into new projects for design, selection, installation, commissioning FAT, SAT and evaluations of operability and maintainability of rotating equipment.
  • Lead and participate in RCA (Root Cause Analysis) /Causal Learning discussion on failure investigations.
  • Maintaining the Equipment history for future retrieval and improvements.
  • Application of engineering standards and codes for the installation.
  • Compliance Audit and Assurance function by providing support to management in facilitating maintenance and integrity compliance audits. Lead/facilitate PM assurance review and Asset Register verification exercise, and Process effectiveness review.
  • Support to populate inputs into Computerized Materials and Maintenance Management System (CMMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to maintenance planner with regards to mechanical maintenance activities for his consolidation into SAP PM Plan.
  • Collaborate in the analysis of operating modes and the updating of operating norms and procedures.
  • Identify research opportunities and recommend novel techniques to enhance the reliability, capacity and cost effectiveness of Equipment operations. Coordinate relevant research and development projects in the fields of reliability engineering, performance and condition monitoring, inspection and troubleshooting of rotating equipment.
  • Conduct on-the-job training for new mechanical staff. Supervise and groom Junior Mechanical Engineers to develop their technical knowledge, skills and competencies in order to produce potential talent for future business needs.
  • Participates in safety training, on job training, firefighting exercises and use of fire /safety equipment.
  • Any other duty that may be assigned by Line Manager.

Requirements

  • Bachelor’s degree/HND in Mechanical Engineering.
  • Minimum of ten (10) years’ working experience in Mechanical maintenance in oil and gas sector downstream or upstream.
  • Proficient to the codes and standards in the oil and gas industry i.e. API, BS, ISO, ASME, etc.
  • Knowledge of Maintenance Management System
  • Strong communication skills with well-developed interpersonal and visible leadership capability;
  • Working with culturally diverse work force and striving to develop a mutually healthy industrial relation

Application Closing Date
Not Specified.

How to Apply

Interested and qualified candidates should:
Click here to apply online


4. Job Title: Automation Engineer

Location: Port Harcourt, Rivers
Industry: Oil & Gas
Job Description

  • This position is responsible for developing, designing, and testing a variety of equipment, facilities, components, and systems of instrumentation, control systems and process automation for LNG plant, regasification facilities and filling stations.
  • Develop control system architecture design documentation (block diagram).
  • Provide technical direction for the design, configuration and troubleshooting of firewalls, routers, switches and other network infrastructure
  • Support development of control narratives, testing documentation and commissioning/start-up documentation.
  • Support P&ID development; help maintain the P&ID’s through the course of each project phase
  • Programming and Automation of VFDs, Generator Controls and their interface to plant and Regasification equipment controls.
  • Support incorporation of control systems content into vendor packages
  • Ability to conduct Failure Mode, Cause and Effects, Criticality Analysis and root cause analysis.
  • Definition of control system configuration (DCS, PLC, HMI)
  • Support development of the Instrument Index and I/O List; help maintain the Instrument Index and I/O List through the course of each project phase. Addressing control equipment (Input/output (I/O) lists, networks, etc.)
  • Signal assignment and JB definition, preparation of detailed documentation (diagrams, material lists, cables)
  • Preparation of technical specifications and purchase material lists for control panels and various equipment
  • Review and alignment / technical validation of vendor offers.
  • Knowledge and review of the regulations and specifications applicable to the project
  • Guarantee the compliance of the documents to the contractual requirements in accordance with the assigned budget and the planning of the order – positioning of control devices, position /definition of control room equipment.
  • Review of detail design of electrical, instrumental and pneumatic components, lay-out components, raceways, hook-ups etc.
  • Design hook-up analysis system including preparation material take-off (MTO).
  • Design / review documents various control system (functional diagrams, loop diagram, instrument block diagram etc.).
  • Collaboration and coordination with the team of different specializations, process for equipment that impacts the project, instrumentation for the control system and project engineer for the electrical equipment packages.
  • Participate in the internal testing phase and acceptance testing in line with vendor requirement. customer
  • Provide technical advice during troubleshooting and corrective action of instrument breakdown or failures to find the root cause and best solution in order to restore the functionality back to normal.
  • Identify, study, propose, and implement area for improvement, management of change (MOC) in the field of automation to enhance operation and improve total equipment reliability.
  • Support performance of functional testing on ESD systems and instruments.
  • Collaborate in the analysis of operating modes and the updating of operating norms and procedures.
  • Any other duty that may be assigned by Line Manager.

Requirements

  • Bachelor’s Degree in Electrical/Electronics, Instrumentation Engineering, Computer Engineering or Computer Science disciplines.
  • Minimum of Ten (10) years’ working experience in Automation systems design and implementation in oil and gas sector.
  • Experience in Regasification system, LNG process/oil refinery with strong system integration abilities and background is required.
  • Experience working for an OEM in providing integrated Automation systems.
  • Solid knowledge in the equipment control domain including PLC based control systems and HMI programming:
  • Allen Bradly, GE Visca Max, Mark 6 Safety PLC control system, Siemens S7-200 PLC and Hardware Configuration.
  • PLC programming of Studio 5000, probicy machine, Siemens Combo box logic etc.
  • Working knowledge of HMI software such as IM touch wonder wall, Archestra, CS 3000, Compact AMP, etc.
  • Programming knowledge of ladders logic, functional block diagrams, instruction logics and command logics.
  • Knowledge of automation systems hardware and software for Process Control, Instrumented Safety Systems and Fire and Gas systems.
  • Experience in performing on-site modifications to automation systems through site management of change.
  • Experience developing automation solutions (Python, Ruby, Java, Node.js, .NET, etc.)
  • Experience working with common application architectures (app/web servers, containerization, etc.)
  • Knowledge of IP Networking including VPCs, DNS, load-balancing, and firewalls
  • Enterprise scale Systems Administration experience is a plus
  • Ability to explain issues and resolutions to technical and non-technical staff
  • Persists on completion of endeavors, especially in the face of overwhelming odds and setbacks.
  • Pushes self for individual results and others through team spirit
  • Strong analytical skills, creative and business focused problem-solving abilities
  • Reacts open-mindedly to new perspectives or ideas. Considers different or unusual solutions when appropriate.

Application Closing Date
Not Specified.

How to Apply

Interested and qualified candidates should:
Click here to apply online


5. Job Title: Client Account Manager

Location: Rivers
Job Summary

  • To represent  the company and maximise the business prospects including all products and services with Client.

Job Description

  • Deliver maximum utilization of existing contracts by maintaining relationships with Clients through regular daily review visits.
  • Identify and develop new opportunities with the Client as identified.
  • Identify competitors & report competitor activity & market share
  • Set up meetings and presentations seamlessly for Business Unit Managers, Sales Manager, Marketing Manager and any other official as required.
  • Carry out any other Business Development activity that may be required by the company vis-à-vis the client.
  • Align initiatives between the Client and the company by imbibing and transferring relevant aspects of Client’s QHSE and other systems into the company
  • Nurtures positive, collaborative working relationship with clients
  • Responsible for the production & presentation of client facing materials (reports, studies, presentations, to company standards)
  • Customer focused with ownership of client needs/requests & facilitate completion
  • Meet & exceed client expectations by utilising client’s processes/procedures to get results
  • Achieve continuous improvement by proactively assessing company’s working relationship, practices & methods.
  • Manage the complete business and marketing plans for the account as laid down for the respective accounts.

Requirements

  • Candidate should possess a minimum of a good bachelor’s degree or HND in Electronics / Instrumentation & good knowledge of Process Control automation systems and  Field Instrumentation
  • Combined experience of at least 5-10 years in sales & marketing or account management typically handling customers from Process Industry in Nigeria including major Oil and Gas customers

Application Closing Date
Not Specified.

Method of Application

Interested and qualified candidates should send their CV to: [email protected] using the Job Title as subject of the email.


6. Job Title: Recruitment Consultant

Location: Lagos
Job Summary

  • The Recruitment Consultant is responsible for delivering full life cycle recruiting, from Client Acquisition to candidate sourcing to on boarding and placement.

Key Responsibilities

  • Responsible for resourcing and placing top talents across client companies.
  • Responsible for sourcing talents using a wide range of methodologies.
  • Receiving and reviewing applications, short-listing candidates and managing the interview process.
  • Client relationship management.
  • Developing a good understanding of client companies, their industry, what they do, their work culture and environment
  • Offering advice to both clients and candidates on pay rates, training and career progression
  • Develop and maintain strong working relationships with hiring managers and other team
  • Responsible for scheduling and logistics of all interviews between candidates and hiring managers.

Requirements

  • Bachelor’s degree required, with a minimum of 1 – 2 years of recruitment experience within a Consulting Firm
  • Demonstrated experience and proven success with Client acquisition, customer relationship management and candidate placement.
  • Ability to source passive candidates by executing effective reach out and communication strategy.
  • Excellent written and oral communication skills along with an ability to interact and develop networks in a professional manner externally & across the business.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online


We cherish your opinion and we look forward to it. Hence, if you need us to feed you with more updated information at the right time about Sellafield Energy Resources Limited Recruitment 2019, kindly provide us your phone number and email Address in the comment box below.

What’s your take on this? We believe this article was helpful, if yes, don’t hesitate to share this information with your friends on Facebook, Twitter, Whatsapp and Google +

CSN Team.

Join Over 500,000+ Readers Online Now.

Ads: Knock-off Diabetes in 60 Days => ORDER HERE!


Subscribe NOW to Latest GIST from CSN PORTAL in Your EMAIL ADDRESS

Copyright Warning: Contents on this website may not be republished, reproduced, redistributed either in whole or in part without due permission or acknowledgement. All contents are protected by DMCA.
The content on this site is posted with good intentions. If you own this content & believe your copyright was violated or infringed, make sure you contact us at [[email protected]] to file a complaint and actions will be taken immediately.

Tags: , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *