10 Notable Differences Between BJT and MOSFET
Difference Between BJT and MOSFET: BJT and MOSFET are both transistors applied in switches and amplifiers. They produce large variations in the electrical signals due to the changes in the applied input signals. Although they are share similarities, they still have significantly different characteristics.
BJT and MOSFET
Bipolar Junction Transistor is a semiconductor device that replaced the vacuum tubes of the old days. The contraption is a current-controlled device where the collector or emitter output is a function of the current in the base.
Basically, the mode of operation of a BJT transistor is driven by the current at the base. The three terminals of a BJT transistor are called the Emitter, Collector and Base A. BJT is actually a piece of silicon with three regions.
There are two junctions in them where each region is named differently ‘“ the P and N. There two type of BJTs, the NPN transistor, and the PNP transistor. The types differ in their charge carriers, wherein, NPN has holes as its primary carrier, while PNP has electrons.
The operation principles of the two BJT transistors, PNP and NPN, are practically identical; the only difference is in biasing, and the polarity of the power supply for each type. Many prefer BJTs for low current applications, like for switching purposes for instance, simply because they’re cheaper.
Metal Oxide Semiconductor Field-Effect Transistor, or simply MOSFET, and sometimes MOS transistor, is a voltage-controlled device. Unlike the BJT, there is no base current present. However, there’s a field produced by a voltage on the gate. This allows a flow of current between the source and the drain. This current flow may be pinched-off or opened, by the voltage on the gate.
In this transistor, a voltage on an oxide-insulated gate electrode can generate a channel for conduction between the other contacts ‘“ the source and drain. What’s great about MOSFETs is that they handle power more efficiently.
MOSFETs, nowadays, are the most common transistor used in digital and analog circuits, replacing the then very popular BJTs.
Notable Distinction Between BJT and MOSFET
1. BJT is a Bipolar Junction Transistor, while MOSFET is a Metal Oxide Semiconductor Field-Effect Transistor.
2. A BJT has an emitter, collector, and base, while a MOSFET has a gate, source and drain.
3. BJTs are preferred for low current applications, while MOSFETs are for high power functions.
4. In digital and analog circuits, MOSFETs are considered to be more commonly used than BJTs these days.
5. The operation of MOSFET depends on the voltage at the oxide-insulated gate electrode, while the operation of BJT is dependent on the current at the base.
If you enjoyed this article, subscribe with your email for related materials. Thanks.
Join Over 500,000+ Readers Online Now!
COPYRIGHT WARNING! Contents on this website may not be republished, reproduced, redistributed either in whole or in part without due permission or acknowledgement. All contents are protected by DMCA.
The content on this site is posted with good intentions. If you own this content & believe your copyright was violated or infringed, make sure you contact us at [[email protected]] to file a complaint and actions will be taken immediately.