How to Remove Granite Countertops

– How to Remove Granite Countertops –

You can remove granite countertops by removing the adhesive to disconnect them from the cabinets. In this article, we show you how to remove granite countertops easily.

How to Remove Granite Countertops

How to Remove Granite Countertops

An easy approach to improve the appearance of your home is to redesign the kitchen. The countertop is one of the most popular areas of attention.

Your kitchen’s appearance can be drastically improved by replacing an outdated granite countertop with one made of more attractive and functional material.

There are a number of tools needed to enable a flawless removal of granite countertop slabs. They include:

‣ Gloves

‣ Safety goggles

‣ Dust mask

‣ Caulk softener

‣ Bucket

‣ Box cutter

‣ Wrench 

‣ Putty knife

‣ Screwdriver

‣ Chisel

‣ Pry bar

‣ Reciprocating saw

Removing the Granite Countertop

The reciprocating saw is to be used in lifting the countertop, just in case it is too heavy. You can follow the steps below to start removing the granite countertop.

‣ First, you have to find the junction where the granite countertop and cabinets meet. To find the joint, look inside the cabinet’s top.

‣ After that, carefully tap this joint with your hammer to insert the pry bar. To remove the glue or adhesive holding the two together, gently turn.

‣ Start tapping the wooden shim on the edge of the cabinet to hold the granite countertop in place at the desired location. 

‣ When you can progressively lift the entire front frame, stop screwing and shimming from the cabinet’s front side.

‣ Continue digging deeper inside the cabinets, raising the granite slab with a hammer and your pry bar until you reach the very end. 

To hold the space between the cabinet and the granite slab, make careful to insert wooden shims at each step.

‣ Continue until the entire slab has been elevated. Be gentle to protect the granite countertop from damage.

‣ You’ll need the help of many individuals to remove the countertop off the top of the cabinets.

Have one person for every three to four feet of the countertop, depending on the size of the slab.

‣ While doing so, slightly tilt the countertop from the back edge so that it lands in your hands. 

‣ From this point, carefully move the granite countertop to the desired storage location.

Make sure to store the granite slab properly to prevent damage by placing it in storage with its top facing down.

The granite countertop can be removed this way, however, we always suggest you use a professional.


How Do I Remove Countertops that are Glued Down?

It is not worthwhile to save time or effort on countertops. Correct countertop removal should make it simple to add tile, stone, or laminate.

Step 1: Remove All Appliances

Always remove anything sitting on top of the countertop before you remove it.

Since you don’t want to endanger the cabinets more, clearing the area will provide you with the much-needed space you need to complete the task.

Step 2: Remove the Caulk

Break the caulk between the backsplash and the wall using a utility knife.

‣ Next, insert your putty knife between the backsplash and the wall.

‣ Use a pry bar to remove the countertop to simplify the operation.

Try to remove the backsplash away from the wall where there is a stud in order to avoid damage. This will lessen the risk of the backsplash’s supporting wall becoming damaged.

Step 3: Detach Every Screw

Although the countertop may be cemented in place, it is also held in place by screws. Your countertop is secured in place by screws if it is not held together with adhesive.

This process is simpler if such is the case. To avoid harming the cabinets, all you need to do is take out the screws and gently lift the countertop.

How to Remove Granite Countertops

How Does One Sanitize Granite Counters?

To sanitize your granite counters, you can do the following:

‣ Pour warm water into a clean 1-liter spray bottle

‣  Add 4 teaspoons of isopropyl alcohol

‣ Add 4 drops of dishwashing soap to eliminate bacteria on granite. 

‣ After that, spray the granite.

‣  When you’re done, use a fresh, gentle towel to clean it.

Avoid using cleaning wipes, ammonia, or bleach on your granite countertops.

The easiest way to ensure that your counters sparkle is to clean up stains as soon as they occur.

Continually use a mild, granite-safe cleanser for spill cleanup, and always keep the seal intact. 

You should regularly use a granite cleaner that has some polish to retain its shine because mild dish soap can build up.

Also, always make sure the sealant is still in place by checking it. If it isn’t, then seal it again or get a professional to do the job.


How Do I Remove Oxide Stains on a Granite Countertop Piece?

You can remove oxide stains from a granite countertop by using baking soda and water paste.

‣ After you have formed a thick paste out of baking soda and water, apply it to the rusted area, and let it sit for at least 24 hours.

‣ Use a nylon brush or a granite cleaning pad designed specifically for stone surfaces. Cleaning the area should be done in circles.

Will Removing Granite Countertops Ruin Cabinets?

If you are very careful when removing the countertop, it will not ruin the cabinet.

In fact, because of their beauty and durability, granite countertops are a favorite among many homeowners.

Despite being a durable material, granite still needs to be maintained.

Before you remove the countertop, ensure that you remove any adhesive connecting the countertops to the cabinets.

How to Remove Countertops Put on With Liquid Nail?

In order to remove countertops that have liquid nails, you have to soften the caulk or adhesive first.

After that, heat the adhesive using an electric heat gun or blow dryer.

Afterward, using a putty knife or a flat edge, scrape the adhesive off. Then finally, use mineral spirits to wipe away any leftover residue from your surface.

We believe this article was helpful to you. Please feel free to share this with your friends and loved ones.

CSN Team.

Similar Posts